E3D V5 & V6 SINGLE & DUAL fan duct holder (Prusa I3) VER 2.0
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Design based here :
http://www.thingiverse.com/thing:533029
(for E3D_v5_v6_40mm_Duct.stl and E3D_v5_v6_40mm_Duct_Mirrored.stl)
and here :
http://www.thingiverse.com/thing:958827
---------------------------------------------------------
If you want the SINGLE fan version print :
E3Dv5-Holder.stl OR E3Dv6-Holder.stl (pick your extruder version)
AND
E3D_v5_v6_40mm_Duct.stl
OR
E3D_v5_v6_40mm_Duct_Mirrored.stl
------------------------------------------------------
if you want the DUAL fan version print
E3Dv5-Holder.stl OR E3Dv6-Holder.stl (pick your extruder version)
AND
Fan-Duck-Left - repaired - oriented.stl
AND
Fan-Duck-Right - repaired - oriented.stl
This version of fan duct is not yet tested.
Needs 4 screws M3 25mm long
2 fans 40mm left/right
1 fan 30 mm central
You might need also a zip tie in order to hold the hole system to the e3d barrel.
I am pretty sure that this version will work extremely well.
If you test it let me know in the comments below.
More info here :
http://www.trustfm.net/hardware/3DPrinter.php
---------------------------
I have added fan guards modifying this :
https://www.thingiverse.com/thing:128718
