Anet A8 E3D V6 mount
Arrives damaged? Free reprint, just film the box being opened. Returns policy
About this print
A replacement hotend mount designed to fit an E3D V6 hotend onto the Anet A8 desktop 3D printer. The bracket positions the hotend on the printer's carriage, allowing owners to upgrade from the stock extruder assembly. Used by hobbyists and makers carrying out printer modifications. PETG is a sensible material choice for this part, as it handles the mild heat exposure near the print area better than standard PLA.
From the original design page
Original maker's notes
By Jeka_tm on Thingiverse · CC-BY
Так как многих волнует проблема охлаждения дам ссылки на те что должны подойти:
https://www.thingiverse.com/thing:1973156
https://www.thingiverse.com/thing:1213670
https://www.thingiverse.com/thing:2344098
Лично я давно без охлаждения, так как печатаю ABS пластиком.
upd 19.01.2017:
я решил в текущих и будущих проектах отказаться от обычных гаек. теперь буду использовать вплавляемые латунные гайки. у них есть ряд перимуществ. вплавлять паяльником с самодельной насадкой
https://ru.aliexpress.com/item/NEW-Best-Price-100pcs-lot-Brass-Knurl-Nuts-M3-4mm-L-4mm-OD-Metric-Threaded-Nuts/32786882329.html
Разделил модели разных версий так как люди путались. Последняя теперь находится здесь:
http://www.thingiverse.com/thing:2021193
If you want assemble mod9 need to print the following files:
1. E3D_mod9_Основание
2. E3D_mod9_Фиксатор
3. E3D_mod9_Охлаждение
4. E3D_Держатель_мотора
5. E3D_mod9_Держатель or E3D_mod9_Держатель_Z_12mm or E3D_mod9_Держатель_Z_18mm
Добавил 2 версии держателя mod_9 под 12 и 18мм бесконтактные датчики. Я не проверял, у меня таких датчиков нет
Добавил еще одну версию mod9
Update 15.10.16
Add E3D_v6_держатель_v2.
Extruder is located a little closer to the shafts, which gives less load on the bearings and reduce vibration
Redraw E3D_v6_фиксатор and E3D_v6_держатель_v2 because it was not working on the site review model.
Extruder installed on the printer will do when cooling 3d model
Update 14.10.16
1. Slight changes X-Carriage and E3D_v6_фиксатор
2. Needed fittings:
2pcs M3x20 screw
4pcs M3x25 screw
6pcs M3 nut
Anet A8 E3D V6 mount
I still check
I printed a layer of 0.15mm and 0.4mm nozzle
For 2 pcs LM8LUU
https://ru.aliexpress.com/item/Free-shipping-2-pcs-lot-LM8LUU-LML8UU-8mm-8x15x45mm-8mm-Long-linear-ball-bearing-bush-bushing/32729699375.html
Or 4 pcs LM8UU
https://ru.aliexpress.com/item/Free-shipping-3D-Printer-Parts-Accessories-Accessory-2Pcs-LM8UU-8mm-8x15x24mm-Linear-Ball-Bearing-Bush-Bushing/32717127901.html
Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.
Printing Anet A8 E3D V6 mount
For Anet A8 E3D V6 mount we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.
Model details
| Downloads at source | 27,638 |
|---|---|
| Likes at source | 1,914 |
| Original model | View on Thingiverse |
| Designer | Jeka_tm |
| Licence | CC-BY |
More popular Thingiverse models
Got your own design?
You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.
- STL, STEP and 3MF
- Priced from £4
- Free Tracked 48 over £40
- Printed in-house in Hampshire
Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts