Freshy Girl 3D Printable Figure

Name: Freshy Girl 3D Printable Figure (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

by Jwhiskey3D · from Thingiverse

From £6.90 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 1,655 likes ↓ 24,280 downloads

🖨️ Get this printed · from £6.90

Have us print this for you

Typical cost for this model in PLA: ~£6.90 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

An anime-style figure at 1:6 scale, designed as a poseable display piece with articulated joints connected by small cylinder pins. The feet fix to a separate base using screws, and clothing sections are modelled at 1.2mm wall thickness, intended for use with a 0.4mm nozzle. PLA is a common choice for display figures, as it holds fine surface detail well and is available in a wide range of colours.

From the original design page

Original maker's notes

By Jwhiskey3D on Thingiverse · CC-BY

My 3Dprint experiment at 1:6 scale.

- Full 3D preview on my >> [sketchfab](https://skfb.ly/X8vJ)
- zortrax .zproj files available on my >> [Zortrax Library](http://library.zortrax.com/project/freshy-girl-3d-printable-figure/)

- All clothes thickness are 1.2mm. Design to print with 0.4mm nozzle.

- Need 2 screw to fix feet on stand base.
Which size of screw? You can 3Dprint the mockup sample out and go ask the hardware store.

- Also require a lot of cylinder pin 1.7mm diameter. 15-20mm Length.
Hard wire maybe work. I use small wood nail (head clipped)

- Garment model made in [Marvelous Designer](https://www.facebook.com/Johnnie3Dtalk/photos/a.1123363244443452.1073741840.147909088655544/1166984520081324/?type=3&theater)

- Other costumes [01](https://skfb.ly/XvqJ) , [02](https://skfb.ly/VsCU)

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Freshy Girl 3D Printable Figure

For Freshy Girl 3D Printable Figure we would normally reach for PLA, or resin for the finest detail — PLA captures detail cheaply, and resin is an option where the very finest features matter. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	24,280
Likes at source	1,655
Original model	View on Thingiverse
Designer	Jwhiskey3D
Licence	CC-BY

anime figure girl

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £6.90
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts