Customizable Adjustable Glass Bed Bracket for FlashForge Creator Pro etc

**There will be no more updates to this page. [Go to the new GitHub page for the latest updates.](https://github.com/DrLex0/print3d-adjustable-glass-bed-bracket)**

*Yes, there's quite a bit of text here, but it's worth it to read all of it. Even if you're familiar with Customizer and printing strong heat-resistant parts, you should still read the ‘Mounting’ and ‘Using’ sections for some important hints.*

**Intro**

Yet another iteration of the adjustable glass bed bracket, originally by _chewbone_ and then modified by _omegatron_ and _Lochemage_. This time, not only the bracket itself is adjustable, so is the model! This customizable bracket fits the FlashForge Creator Pro and printers with similar build plates with M3 bolts at their corners. The adjustable knob makes it is easy to swap out glass plates if you have more than one, so you can start printing on another plate while the first one is still cooling down.

The main advantage of this design is that it allows to mount the glass plate without anything sticking out above it. This means you never need to worry about the risk of your nozzles crashing into the brackets. This particular remix improves upon the originals by avoiding to sandwich the bracket between the bed and the nut. This offers a more balanced mount when tightening the knob, while also making it easier to move the bracket.

If you have yet to buy a glass plate, try to find one that is just a few millimeters smaller than the bed in both the X…