Desk Mount Headphone Holder / Mount / Clamp

Name: Desk Mount Headphone Holder / Mount / Clamp (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

by mistertech · from Thingiverse

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 12,285 likes ↓ 206,214 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A desk-mounted headphone holder that clamps to the edge of a table or desk, keeping headphones accessible and off the work surface. The clamp mechanism suits a range of desk thicknesses, and the design accommodates headphone headbands of varying widths. PLA is appropriate for this application, as the holder is used indoors and does not bear significant mechanical load beyond the weight of a headset.

From the original design page

Original maker's notes

By mistertech on Thingiverse · CC-BY

**UPDATE 28JAN2018: I have added a "WIDE" version that can accommodate headphone headbands up to 55mm wide. The original model accommodates headphone headbands to 45mm wide.**

UPDATE: The "Long" version of the screw could grip on to a 1mm table. It's overkill but I wanted to ensure people had a choice that would work. The original screw leaves a 17mm gap so if your table or desk is thinner than 17mm, use the long screw**

While this isn't strictly a remix, I was inspired by another great headphone mount. http://www.thingiverse.com/thing:1657541

I designed this as the above headphone mount cracked on me (I've made 5 and they all cracked in the same spot). Instead of asking the designer to change the design (many people haven't had problems), I decided to try my hand at making my own.

My design goals were to be smaller, stronger, and deeper grooves for the headphone cords than the excellent Monster Mouth Headphone Holder. I also wanted to remove any sharp edges so I didn't scratch myself or my headphone ear seals while using the holder.

Check out my other designs! https://www.thingiverse.com/mistertech/designs

**Please post your comments and makes!**

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Desk Mount Headphone Holder / Mount / Clamp

For Desk Mount Headphone Holder / Mount / Clamp we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	206,214
Likes at source	12,285
Original model	View on Thingiverse
Designer	mistertech
Licence	CC-BY

audio clamp computer Headphone headphones headphones holder headphones Stand headphone hanger headphone holder Headphone mount Headphone stand headset headset holder headset hook headset mount

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts