Anet A8 e3d v6 Bowden Print Carriage Redux

This is a combine work project between myself and [Dan Rogers](http://www.thingiverse.com/knotbeerdan/about). The purpose was to create a print head mount that allows the user some customization to their exact/ or wanted setup **This is for a Bowden setup**. There are 4 variations of the mount:

-Sensor with cooling fan
-Sensor without cooling fan
-No sensor with cooling fan
-No sensor without cooling fan

Many of the parts are interchangeable if you wish to make changes down the road as you upgrade/ change you own setup.

There is some required materials for assembly and they are as follows:

- M3 Hex nut: 8 pieces
- M3 Screw 25mm length: 7 pieces
- M3 screw 20mm length: 1 piece
- The 12 existing screws used to mount the existing carriage to the axis

You can use standard screws or socket head screws

**Printing**

You will want to use some supports when printing the PRINT CARRIAGE PLATE and the HEAD LOCK. **DONT** use supports when printing the cooling fan duct.

See the images for the recommended part orientations when printing.

**Assembly**

Prior to assembly, you will want to press fit four (4) M3 hex nuts into the carriage plate, two (2) into the head lock ( the two slots along the top, confirm they align with the screw holes) and 1 into the fan mount (again confirm they align with the screw hole)

Step 1: Attach the belt holder to…