M8,M10,M12 Hexnut Fidget Spinner

Name: M8,M10,M12 Hexnut Fidget Spinner (3D printed)
Brand: Hark Tech
Price: 5.18 GBP
Availability: InStock

by RoPa · from Thingiverse

From £5.18 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 1,557 likes ↓ 27,567 downloads

🖨️ Get this printed · from £5.18

Have us print this for you

Typical cost for this model in PLA: ~£5.18 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A fidget spinner designed to use standard hex nuts as weights, with configurations available for M8, M10 and M12 nuts. Multiple layouts are offered, including double, tri, quad and penta-spinner versions, each sized around a standard 608 skateboard bearing or compatible alternatives. The nuts are intended to be glued into their recesses once assembled. PETG is a practical choice for this type of spinning mechanism, handling the repeated stress around the bearing seat more reliably than standard PLA over time.

From the original design page

Original maker's notes

By RoPa on Thingiverse · CC-BY-SA

This is a fidget Spinner that uses standard hexnuts (M8,M10,M12) as weights. These should be glued in place.

There seventeen versions:

M12
-- for a 6000 bearing (10x26x8mm)
-- for a standard 608 skate bearing (8x22x7mm) + compact version (smaller diameter)
-- for a 6900 bearing (10x22x6) + compact version (smaller diameter)
-- all as tri or double spinners
M10
-- for a standard 608 skate bearing (8x22x7mm)
-- as double, tri or quad spinner
M8
-- for a standard 608 skate bearing (8x22x7mm)
-- as a double, tri, quad and penta-spinner

The 6900 bearing has the same height of 6mm as ISO 4035 or ISO 8675 M12 nuts.

The provided bearing caps are meant to be pressed into the center hole of the bearing. If the caps do not fit you can adjust the paramters to your liking here: http://www.thingiverse.com/thing:2083000

EDIT: Added double spinner versions for all three bearing types and sizes
EDIT2: M10 and M8 Spinners added.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing M8,M10,M12 Hexnut Fidget Spinner

For M8,M10,M12 Hexnut Fidget Spinner we would normally reach for PLA — it is easy to print, low-odour and plenty strong for everyday use. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	27,567
Likes at source	1,557
Original model	View on Thingiverse
Designer	RoPa
Licence	CC-BY-SA

6000 bearing 608 6900 double spinner duo spinner fidget fidget hand Spinner fidget spinner Fidget Toy hand spinner hex nut m12 nut nut m12 tri spinner

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts