Turbine Blower, housing, and motor electric motor mount.
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Update: Added Motor_Plate_12-19-13.stp, Motor_Plate_12-19-13.igs, Turbine_12-19-13.stp and Turbine_12-19-13.igs. I've had requests to add solid files for the motor mounting plate so people could modify it to fit their specific motor.
This turbine blower assembly was inspired by http://www.thingiverse.com/thing:39755.
I had some problems finding the right motor/gear combination so I modified the turbine so that it could fit a common 9-18V electric motor. I believe I used a Radio Shack# 273-256
The upper housing has added support in the output tube that can easily be cut out.
3/24/14 - Added solid models! Enjoy!
The hardware required is:
7 M3-.5X10mm Socket cap screws.
7 M3-.5 Nylon Lock Nuts
14 M3 Flat Washers
and 2 screws for the motor. I don't know the exact size. I couldn't find them at the Home Depot. I robbed them from a junk laptop I had in my basement. (Possibly M2 or M2.5?)
Enjoy!
