8-Bit Classic Mario

Name: 8-Bit Classic Mario (3D printed)
Brand: Hark Tech
Price: 4.00 GBP
Availability: InStock

From £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 5,478 likes ↓ 25,108 downloads

🖨️ Get this printed · from £4

Have us print this for you

Typical cost for this model in PLA: ~£4 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A retro-style figurine of Mario, the Nintendo character, modelled in the aesthetic associated with classic 8-bit gaming. The piece is intended as a display figure for gaming enthusiasts and Nintendo fans. The model features a high level of geometric detail and benefits from a printer with good dimensional accuracy. PLA handles the fine surface detail this figure requires and is easy to prime and paint for collectors who want a finished, coloured result.

From the original design page

Original maker's notes

By jakejake on Thingiverse · CC0

This Retro Mario figure was modeled from a Nintendo Wii U Amiibo Mario Figure. I really liked the look, so I designed a version that could be 3d printed. Check out my process for designing this thing [here](http://www.jacobstanton.com/3d-printed-retro-mario-figure/) [![jake](http://www.jacobstanton.com/newsite/wp-content/uploads/2017/03/MarioMaker.gif)](http://www.jacobstanton.com/3d-printed-retro-mario-figure/) Take a look below for some additional information if you decide to print. YOUR PRINTER SHOULD HAVE DECENT ACCURACY TO PRINT THIS. This model has a large number of tightly arranged parts with just enough gap to interlock. If your side walls are wavy or have a big "elephant foot" effect, parts might not fit or a tolerance stack up could produce bad results. [//]: # (NewProjectFeature////////////////////////////////////////////////////////////////////////////////////////) [//]: # (SocialMedia////////////////////////////////////////////////////////////////////////////////////////) [//]: # (///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////)

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing 8-Bit Classic Mario

For 8-Bit Classic Mario we would normally reach for PLA — it is easy to print, low-odour and plenty strong for everyday use. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	25,108
Likes at source	5,478
Original model	View on Thingiverse
Designer	jakejake
Licence	CC0

gaming nintendo retro Retrogaming toy

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts