Flat SD Card Holder

Name: Flat SD Card Holder (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 2,517 likes ↓ 24,902 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A flat holder for storing standard SD, SDHC and SDXC memory cards, available in four or six card configurations. Some variants include cutouts to make individual cards easier to remove. The design uses tight tolerances and relies on the cards themselves to hold the two halves together, so a minimum of two cards must be present for the case to close correctly. PLA can print this well, though precise calibration is needed to achieve the required snap fit.

From the original design page

Original maker's notes

By walter on Thingiverse · CC-BY-SA

Flat SD Card Holder, multiple versions (4 or 6 card versions and versions with cutouts for easier card removal).

Tolerances on this design are very tight to get everything to snap together properly, I'm not sure how how much tweaking will be required to get it to print on other printers. The SD cards are part of the the case, so the pieces will only fit together when there are at least two cards in it.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Flat SD Card Holder

For Flat SD Card Holder we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	24,902
Likes at source	2,517
Original model	View on Thingiverse
Designer	walter
Licence	CC-BY-SA

card flash holder sd SDHC SDXC tray

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts