Adjustable-angle tablet-stand with print in place hinges
Arrives damaged? Free reprint, just film the box being opened. Returns policy
About this print
This tablet and smartphone stand uses print-in-place hinges to produce a fully assembled, adjustable-angle holder straight from the print bed, with no screws or post-print assembly required. The hinges allow the stand to be set across a range of incline angles, making it usable with tablets and phones of varying sizes. PLA prints this part well and provides enough rigidity to support the weight of a tablet without flex during use.
From the original design page
Original maker's notes
By sjfc100 on Thingiverse · CC-BY
PLEASE SEE LATEST UPDATE BELOW!
This is my design for a print-as-one (print-in-place) hinged tablet stand that can be adjusted over a wide range of incline angles. I was looking around on thingiverse for something of this nature but could only find adjustable ones that need screws and nuts to assemble, or some other post-print assembly. I thought there must be a better way!
This will work straight off the print bed. Just peel away the brim and VERY CAREFULLY loosen the hinges and you're good to go. I've been using it with a large 9.7" Galaxy Tab S2 with a case on and it supports it nicely and feels very stable.
When you first unfold it, the inner two parts have to swing all the way round the outer base piece so that it brings the supports on to the top side of the base where the position notches are located. Then to put it away flat, just rotate all the way round to the back again.
There may well be a few improvements that could be made to the design, but I would welcome any comments and suggestions! At the moment, the supports are spaced a little too wide to use for my Samsung Galaxy S5 smartphone, so I have considered maybe a smaller version to accommodate phones as well. Not sure if the narrower design would become unstable for large tablets though.
### UPDATE - 14 Oct 2017 ###
I've now uploaded a narrower version that will support a smartphone. I haven't printed it myself yet, but the tolerances are all the same so it should work out fine. Let me know how you get on with it!
### UPDATE - 02 Sep 2018 ###
Big thanks to @pjyarnall for sending me his modified design for my tablet stand, there's now an updated version for you to download that has improved tolerances and hinges for easier printing without binding. There is also an enlarged hook to accommodate thicker tablet cases. Download the file called py_tablet_stand_assembly.stl.
Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.
Printing Adjustable-angle tablet-stand with print in place hinges
For Adjustable-angle tablet-stand with print in place hinges we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.
Model details
| Downloads at source | 17,619 |
|---|---|
| Likes at source | 1,417 |
| Original model | View on Thingiverse |
| Designer | sjfc100 |
| Licence | CC-BY |
More popular Thingiverse models
Got your own design?
You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.
- STL, STEP and 3MF
- Priced from £4
- Free Tracked 48 over £40
- Printed in-house in Hampshire
Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts






