Articulating, Wall-Mounted, Magnetic Phone Mount

Name: Articulating, Wall-Mounted, Magnetic Phone Mount (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

by doctriam · from Thingiverse

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 26,412 likes ↓ 126,282 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A wall-mounted phone holder with an articulating arm and magnetic attachment point, allowing the phone to be repositioned and held at different angles once fixed to a wall or surface. Designs of this type are commonly mounted beside a desk or workstation to keep a phone visible without occupying bench space. PLA is suitable for the printed components, as the assembly is largely static once in place and does not require flexibility or heat resistance.

From the original design page

Original maker's notes

By doctriam on Thingiverse · CC-BY

**Update (6/23/2018): I'm sharing this Fusion 360 model(I hope I did it right): https://a360.co/2KgA3Z9

I'm sorry to anyone who has tried to contact me. I've been busy with a full-time job plus engineering classes. Every time I log in, I see that I have infinity notifications waiting for me to address them.

But, I finally took the time to figure out how to share the model so you can make changes or fix the model in any way you want.

I'm glad so many people have gotten use out of my design.

**Update (7/24/2017): Important notes in the print settings.

I've been debating mounting a TV on the ceiling above my bed. The only reason I haven't done it is because of a fear of being crushed by a falling TV while I'm sleeping.

This design allows me to watch Youtube, Netflix, or other streaming video while I'm falling asleep.

**Non-Printed Parts:**
[Adhesive Metal Plate for Magnetic Phone Mounts](https://www.amazon.com/Pop-Tech-Universal-Adhesive-Magnetic-Rectangular/dp/B00ZTUHRI4/ref=sr_1_4?ie=UTF8&qid=1500831023&sr=8-4&keywords=magnetic+mount+plate)
[4-Pack Enkay 4480-C Magnets](https://www.amazon.com/Enkay-4480-C-8-Pound-Magnet-4-Piece/dp/B003UYA45Y/ref=sr_1_1?ie=UTF8&qid=1500831147&sr=8-1&keywords=enkay+4480-c)
4x Screws that fit in a 5 mm hole with a head diameter no larger than 7.9 mm
4x Wall Anchors for those screws
Electrical Tape

If I had to guess on the screw size based on the charts I found online, I would say it's a #10 screw, but I designed the wall mount around some unlabeled screws and anchors I had lying around.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Articulating, Wall-Mounted, Magnetic Phone Mount

For Articulating, Wall-Mounted, Magnetic Phone Mount we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	126,282
Likes at source	26,412
Original model	View on Thingiverse
Designer	doctriam
Licence	CC-BY

articulating magnet magnetic mount phone stand

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts