Sunglasses Car Sun Visor Clip

Name: Sunglasses Car Sun Visor Clip (3D printed)
Brand: Hark Tech
Price: 4.00 GBP
Availability: InStock

From £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 33,636 likes ↓ 151,949 downloads

🖨️ Get this printed · from £4

Have us print this for you

Typical cost for this model in PLA: ~£4 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A clip designed to hold a pair of sunglasses against the sun visor inside a car, keeping them accessible while driving without taking up tray or cup holder space. It attaches to the visor without tools. ASA is the recommended material for this print, as car interiors can reach temperatures during warm weather that cause PLA to soften and deform, whereas ASA retains its shape in higher ambient heat.

From the original design page

Original maker's notes

By arcanelayers on Thingiverse · CC-BY

### Description

This is a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to your driving experience. Never lose track of your sunglasses again! 😎🚗✨

#### Print Recommendations

For hot climates, PLA will likely melt a bit and cause the model to bend. I would highly recommending printing this model in ASA, [this Polymaker ASA](https://amzn.to/4iMOTqZ)¹ works well for me¹. I also would recommend using a higher percentage infill so that there is more plastic if it does soften.

Layer Height: 0.15-0.2mm Quality
Material: [ASA](https://amzn.to/4iMOTqZ)¹
Infill: 30% or higher
Supports: None

#### Other Versions

Head to printables to grab the Fusion 360 file and presliced GCode: [https://www.printables.com/model/220058-sunglasses-car-sun-visor-clip](https://www.printables.com/model/220058-sunglasses-car-sun-visor-clip)

V2: [https://www.thingiverse.com/thing:4299084](https://www.thingiverse.com/thing:4299084)

*1) This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!*

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Sunglasses Car Sun Visor Clip

For Sunglasses Car Sun Visor Clip we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	151,949
Likes at source	33,636
Original model	View on Thingiverse
Designer	arcanelayers
Licence	CC-BY

car RayBan sunglasses sunglasses clip sunglasses holder

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts