Creality CR-10 Z axis cable drag chain
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
New: Combo YZ bracket when using both this and https://www.thingiverse.com/thing:2708420
Drag chain assembly for CR-10 to manage cabling from the X carriage (hotend, X motor and end-stop, extruder motor) so that it doesn't just hang freely. Works only with cable extensions, especially the hot-end cable assembly with the aviation plug.
Requires:
- 3x t-bolt hammer slot nuts + bolts
- 1x M5 50 mm bolt (can reuse the nut from the current wheel bolt assembly)
- zip ties to hold cable to top and bottom brackets.
Chain links are wider than those used for my Y axis cable chain (https://www.thingiverse.com/thing:2708420)
Top bracket:
There are 2 versions.
The version *with* cutout is needed for printers without a stepper dampener installed
The version without cutout is suitable for printers with stepper dampener installed.
Print:
10x bottom links (100% infill)
10x top links (100% infill)
1x top bracket (100% infill)
1x bottom bracket (100% infill)
