Druidic Dice Tower with Tray
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
I loved the Druidic Dice Tower but I wanted it to have a dice tray, so now it does! I highly suggest printing version 5.2 or 5.Smoothed, as the other versions won't play nice with larger dice like d12s and d20s. If you like the simplified look of version 2, you can print it at 110% to make it also work with the larger dice.
About Version 2:
After uploading, I noticed the original was very slightly off center looking to me, so I moved the dice tray a tiny bit and now I think it looks slightly better.
About Version 3:
I wanted to find something that would be a bit less smooth and ordered than the dice tray I had used, so I went searching and found a fire ring that looked like it would do the trick (see remix sources).
About Version 5.2:
After printing version 3 and discovering that it didn't work with d20s, I made some smoothing adjustments to the interior of the stone archway that helps larger dice like d20s and d12s go through. I also roughed-up the path leading out of the stone archway a little bit.
About Version 5.Smoothed: Ok, I kind of went nuts with the smoothing brush all over the inner surfaces of the dice tower :3 (otherwise equivalent to Version 5.2)
UPDATE: I finally printed the smoothed version and I absolutely love it! The tower has no problems with all standard dice sizes including d20s and d12s, although the opening is too small for MTG Spindown dice, but those aren't made for rolling anyway so whatever.
