Tower Planter Pot
Arrives damaged? Free reprint, just film the box being opened. Returns policy
About this print
A small planter pot styled as a castle tower, designed to hold succulents and other compact plants. It includes a drainage indicator in the lower section, so water pooling there signals overwatering, along with vents at the base to allow airflow through the soil. Suitable for a desk or windowsill display. PLA is a good match for indoor decorative pieces, and the arched overhangs mean supports are not required during printing.
From the original design page
Original maker's notes
By Qrome on Thingiverse · CC-BY
Castle tower for your succulent? Yes, another succulent planter for your desk or home. This one has the over water drain in the lower level. If you see water there, you have watered too much. The bottom vents allow the soil to breathe.
This was printed using 3D Mars Wood PLA at a resolution of 0.2 and 20% infill. There is no need to use supports when printing. All the over hangs are arched and should print just fine without support.
3D Mars Wood PLA and Bizard 3D Tech Wood PLA: https://amzn.to/2IwVWSr
Finished with Sedona Red Minwax: https://amzn.to/2mWSszV
With a clear coat of satin clear spray: https://amzn.to/2LFHgXr
You can get the Minwax and Satin Clear spray from a local Home Depot.
My Printer: http://amzn.to/2BBYP4t
Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.
Printing Tower Planter Pot
For Tower Planter Pot we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.
Model details
| Downloads at source | 30,102 |
|---|---|
| Likes at source | 5,389 |
| Original model | View on Thingiverse |
| Designer | Qrome |
| Licence | CC-BY |
More popular Thingiverse models
Got your own design?
You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.
- STL, STEP and 3MF
- Priced from £4
- Free Tracked 48 over £40
- Printed in-house in Hampshire
Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts