DeWalt battery holder

Name: DeWalt battery holder (3D printed)
Brand: Hark Tech
Price: 5.75 GBP
Availability: InStock

From £5.75 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 2,867 likes ↓ 29,989 downloads

🖨️ Get this printed · from £5.75

Have us print this for you

Typical cost for this model in PLA: ~£5.75 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A wall-mounted battery holder designed to clip under a shelf and keep DeWalt batteries organised and off the workbench. The bracket holds the batteries securely by their terminals, making them easy to grab and return. Countersunk mounting holes allow a flush fit against the shelf underside. PLA is a suitable choice for this application, as the holder carries moderate static loads in a dry indoor environment such as a garage or workshop.

From the original design page

Original maker's notes

By maglub on Thingiverse · CC-BY

This is a simple holder for DeWalt batteries, to be fitted under a shelf.

* Prints well with my Ultimaker 2+ using normal off the shelf PLA.
* I usually have to rotate the STL (sorry for the weird rotation) 90 degrees so it lays flat when rendering in Cura.
* I have gotten some comments that some people has gotten better results printing it standing up (instead of laying down).
* I have gotten some comments that the fit is very tight. If you scale the model to 102% / 105% you might have a better fit on your printer and your batteries.
* The countersunk holes are 5mm with a 10mm head
* Designed in Fusion 360, design can be downloaded here: https://a360.co/2GmrRrj
* Ok to use in any way you want. If you like it, donate to a homeless shelter or an animal rescue, or just enjoy life as it is.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing DeWalt battery holder

For DeWalt battery holder we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	29,989
Likes at source	2,867
Original model	View on Thingiverse
Designer	maglub
Licence	CC-BY

dewalt holder shelf

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts