🖨️ No printer? We’ll print & post it.From £4 · UK delivery from £3.45 · Free Tracked 48 over £40Get an instant quote →
SpaceX Falcon Heavy & Falcon 9

SpaceX Falcon Heavy & Falcon 9

by JRad · from Thingiverse
From £4 printed to order · UK postage from £3.45, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy
Free community design ♥ 1,531 likes ↓ 24,401 downloads
🖨️ Get this printed · from £4

About this print

Scale display models of SpaceX's Falcon 9 single-core rocket and the Falcon Heavy, a triple-booster heavy-lift vehicle, intended for collectors and space enthusiasts. Both are designed as multi-part assembly kits for desk or shelf display. PLA is a good fit for display models of this kind, as it prints cleanly, is straightforward to paint, and keeps material costs reasonable across a multi-component build.

From the original design page

Original maker's notes

By JRad on Thingiverse · CC-BY

*****************************************************
1/13/2020
New updated block 5 version is up now!
https://www.thingiverse.com/thing:4101254
*****************************************************

Remixed for a more sturdy model and less support for printing.

Only included files for parts I remixed. Payloads and second stage engines from original should fit.

Enjoy!

5/3/2019 update: I just uploaded my own version of the second stage engine. It's closer to scale, more detailed, and it prints without supports.

4/10/2019 update: Another common complaint is that the engines break off easily. I'm uploading new files for with the "engines" broken into two parts, the base, and the engines. Engines snap in so they do not need to be glued and they can be replaced if they get broken. You can also now print the base in black and the engines in silver so it looks more like the real thing :-)

4/4/2019 update: There have been a lot of complaints about stringing on the grid fins... I've just uploaded a new version of the grid fins "Grid fin HOLES FILLED" where the holes don't go all the way through. I think this will solve the stringing issue for those who are having trouble with that.

3/21/2019 update: Added Falcon Heavy booster connecting conduits.

4/10/2017 update:
Added the dragon capsule trunk. SHOULD work with the rest of the original parts from Chemteacher628 (capsule, side covers, solar panels), but I have NOT printed and test fit it myself yet.

6/7/2018
Courtesy of N95JPL via the comments.
Thanks!

For the Falcon 9 (Payload Fairing) version:
4 x Grid_Fin
4 x Landing_Leg
4 x Actuator_Female
4 x Actuator_Male
1 x Second_Stage_Interstage
1 x Payload_Fairing_1-piece OR 2 x Payload_Fairing
1 x Engines
1 x Second_Stage_Engine (From https://www.thingiverse.com/thing:2457148)
1 x Second_Stage_repaired
1 x Booster_Forward_Falcon_9
1 x Booster_Aft_Section_1_Falcon_9
1 x Booster_Aft_Section_2
1 x Booster_Aft_Section_3

For the Falcon Heavy version:
12 x Grid_Fin
12 x Landing_Leg
12 x Actuator_Female
12 x Actuator_Male
1 x Second_Stage_Interstage
1 x Payload_Fairing_1-piece OR 2 x Payload_Fairing
3 x Engines
1 x Second_Stage_Engine (From https://www.thingiverse.com/thing:2457148)
1 x Second_Stage_repaired
1 x Booster_Forward_Falcon_Heavy_Center
1 x Booster_Forward_Falcon_Heavy_Left
1 x Booster_Forward_Falcon_Heavy_Right
1 x Booster_Aft_Section_1_Falcon_Heavy_Center
1 x Booster_Aft_Section_1_Falcon_Heavy_Left
1 x Booster_Aft_Section_1_Falcon_Heavy_Right
3 x Booster_Aft_Section_2
3 x Booster_Aft_Section_3
4 x Heavy_Connecting_Pin
2 x Booster_Nose_Cone
Optional: 2 x Booster-Core_Connector (From: https://www.thingiverse.com/thing:2478927) - Gives it more detail!

https://youtu.be/fSCYxhBQ-C4

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing SpaceX Falcon Heavy & Falcon 9

For SpaceX Falcon Heavy & Falcon 9 we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source24,401
Likes at source1,531
Original modelView on Thingiverse
DesignerJRad
LicenceCC-BY

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

  • STL, STEP and 3MF
  • Priced from £4
  • Free Tracked 48 over £40
  • Printed in-house in Hampshire
Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts

Before you order

🖨️ Get this printed · from £4