Screw Top D20 Dice Box V2

Name: Screw Top D20 Dice Box V2 (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

From £6.90 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 2,428 likes ↓ 19,164 downloads

🖨️ Get this printed · from £6.90

Have us print this for you

Typical cost for this model in PLA: ~£6.90 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A storage box for dice, shaped like a twenty-sided die and fitted with a screw-top lid. The lid aligns to the base using the numbered faces as a reference, closing correctly at a specific position. A practical container for tabletop gaming dice. PLA prints this kind of threaded design reliably, holding the tolerances needed for the lid to seat and unscrew smoothly.

From the original design page

Original maker's notes

By StormCrow13 on Thingiverse · CC-BY

New Version of my Dice Box.

First Picture is Xerathul's make.

[I am starting a patreon](https://www.patreon.com/stormcrow13)

When putting the lid on have the 2 between the 10 and 12 to close properly, at larger scales you may need to put the 2 between 10 and 16.

If the lid is tight, lightly hammer it as far as it will go and then unscrew it, tapping with the hammer as necessary. Repeat this until it opens and closes easily

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Screw Top D20 Dice Box V2

For Screw Top D20 Dice Box V2 we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	19,164
Likes at source	2,428
Original model	View on Thingiverse
Designer	StormCrow13
Licence	CC-BY

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £6.90
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts