Parameterizable modular resistor box

Name: Parameterizable modular resistor box (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

by bosbessenbasje · from Thingiverse

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 2,681 likes ↓ 22,227 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A modular, stackable storage box designed to hold resistors and other small components. The boxes connect by sliding into one another rather than relying on friction, making them more secure when stacked. The design is parametric, allowing the width and depth to be adjusted while other dimensions scale accordingly. It suits any small parts storage need, not just electronics. PLA works well here as it produces accurate dimensions and holds its shape reliably for dry storage use.

From the original design page

Original maker's notes

By bosbessenbasje on Thingiverse · CC-BY

This is more or less a remix of RubyFOX's resister box. However, I just took the idea and developed a completely new one. I just think that the credits should go to RubyFOX.

The difference is the method of stacking. It is no longer friction based, but the boxes slide into each other.

I have designed the box to hold some resistors, but it is of course not limited to that. You can store any small material in the boxes.

Furthermore, the box can be changed in size (width and depth), all other dimensions will be changed accordingly.

I have included the Fusion 360 source files. This allows you to change the parameters, but also allows you to change any other part of the box you don't like, or create a new type of drawers.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Parameterizable modular resistor box

For Parameterizable modular resistor box we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	22,227
Likes at source	2,681
Original model	View on Thingiverse
Designer	bosbessenbasje
Licence	CC-BY

box resistor resistor box small small parts storage stackable Stackable container stacking Storage Box

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts