IKEA Lack Enclosure Creality Ender 3 Compilation

Name: IKEA Lack Enclosure Creality Ender 3 Compilation (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

by Woody1978 · from Thingiverse

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 13,990 likes ↓ 98,520 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A compilation of 3D-printed parts for constructing an enclosure around a Creality Ender 3 printer using IKEA Lack side tables as the main structural frame. Such enclosures help maintain a stable temperature around the print bed and reduce draughts, which can improve print quality and reduce warping. PETG is a sensible choice for these parts, as it handles the warmth of an active printer better than PLA.

From the original design page

Original maker's notes

By Woody1978 on Thingiverse · CC-BY

Dies ist meine Version vom Gehäuse für meinen Creality Ender 3.
This is my version of the case for my Creality Ender 3.

Ich habe einige Things hier verwendet, und etwas nach meinen Bedürfnissen modifiziert.
I've used some things here, and modified things to my liking.

Filament Guide: https://www.thingiverse.com/thing:2156762

Griff und Scharniere (handle and hinges): https://www.thingiverse.com/thing:1920010

Spulenhalter( spool holder): https://www.thingiverse.com/thing:2853619

Lack Risers 85mm: https://www.thingiverse.com/thing:2545125

Filamentumlenkung (filament guides) https://www.thingiverse.com/thing:3030708

Creality Printer/V-slot machines/Ender 3 Smart Tool Holder: https://www.thingiverse.com/thing:2894604

Aussparung für Schleppkette: https://www.thingiverse.com/thing:3624551
cable pocket for the chain: https://www.thingiverse.com/thing:3624551

Eine gute Adresse für Acrylscheiben/ Plexiglas auch als Zuschnitt wäre http://qcpinc.net
A good address for acrylic discs / Plexiglas also as a cutting would be http://qcpinc.net

------------------------------------------------------------------------
https://www.youtube.com/shorts/xd8lxbxVZcY
------------------------------------------------------------------------
Update 05.01.2020
Für einen exakten Nachbau von diesem Gehäuse werden folgende Druckteile benötigt:
The following parts are required for an exact replica of this housing:

4x uprights_riser_completed_100mm.stl
4x uprights_complete_revised_70mm.stl
8x uprights_riser_10mm.stl
8x pan_head_right_hand.stl or 8x counter_sunk_right_hand.stl
8x pan_head_left_hand.stl or 8x counter_sunk_left_hand.stl
8x hinge_back_plate.stl
4x handle_back_plate.stl
4x handle.stl

Die Türen (Plexiglas) haben folgende Maße:
Unteres Gehäuse: 445mm x 540mm (verwendete Riser: 4x uprights_complete_revised_70mm.stl + 4x uprights_complete_revised.stl)
Oberes Gehäuse: 445mm x 415mm (verwendete Riser: 8x uprights_riser_10mm.stl)

The doors (Plexiglas) have the following dimensions:
Lower case: 445mm x 540mm (used Riser: 4x uprights_complete_revised_70mm.stl + 4x uprights_complete_revised.stl)
Upper case: 445mm x 415mm (used Riser: 8x uprights_riser_10mm.stl)

------------------------------------------------------------------------
Update 02.01.2019
Ich habe nun das Netzteil aus dem Gehäuse verbannt mit folgenden Teil:
(I have now banned the power supply from the case with the following part:)
https://www.thingiverse.com/thing:2974282
Dazu habe ich Halter für M4 Schrauben gemacht (For this I have made holders for M4 screws) https://www.thingiverse.com/thing:3329297

------------------------------------------------------------------------
https://www.youtube.com/watch?v=xd8lxbxVZcY

------------------------------------------------------------------------
Update 27.01.2019

Auf Wunsch habe ich den upright Riser auf 100mm (gesamt 117mm) erhöht und der Kollektion hinzugefügt.
Upon request, I have raised the upright riser to 100mm (total 117mm) and added to the collection.

------------------------------------------------------------------------
Update 12.08.2019

Hi, es sind wieder einige Änderungen in mein Gehäuse gekommen und das wichtigste ist das Display nach draußen zu bringen. Ich finde nicht nur das Gehäuse mega edel, sondern es ist auch sehr praktisch. Vielen Dank an Marius für das tolle Design
https://www.thingiverse.com/thing:3352127

Hi, some changes have been made in my case and the most important thing is to bring the display out. I find not only the case mega noble, but it is also very practical. Many thanks to Marius for the great design
https://www.thingiverse.com/thing:3352127

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing IKEA Lack Enclosure Creality Ender 3 Compilation

For IKEA Lack Enclosure Creality Ender 3 Compilation we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	98,520
Likes at source	13,990
Original model	View on Thingiverse
Designer	Woody1978
Licence	CC-BY

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts