Adjustable Feet (2") - for 4020 & 4040 extrusions

Name: Adjustable Feet (2") - for 4020 & 4040 extrusions (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

by FedorSosnin · from Thingiverse

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 2,203 likes ↓ 20,862 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

Adjustable levelling feet designed to fit into 4020 and 4040 aluminium extrusion slots, compatible with Creality Ender 3 and CR-10 printers. They raise the printer from the work surface by roughly two inches and allow minor adjustments to reduce movement on an uneven table. PETG or PLA both suit this type of structural foot, with PETG offering slightly more toughness for a component that bears the machine's weight continuously.

From the original design page

Original maker's notes

By FedorSosnin on Thingiverse · CC-BY

I noticed my Ender 3 had a slight wobble when sitting on an even tabletop and I couldn't seem to adjust it. Printing these legs fixed my issues. Plus, elevating the printer 2" made it much easier to move around when needed. I also added some 1.5" sticky pads from my local hardware store to help dampen sound and vibration. ;) NOTE: If the feet aren't fitting into your slots, place them into the freezer for a few hours and try again. They should slip right in. (Thank you @SMKIA for the idea) Enjoy and post your makes! If you found my Things useful, treat me to a cup of coffee by using the PayPal button below :) Buy me a cup of coffee Buy me a cup of coffee $3.00 USD Buy me a massive cups of coffee $5.00 USD Give me a caffeine coma $10.00 USD -------------------------------------------------------------

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Adjustable Feet (2") - for 4020 & 4040 extrusions

For Adjustable Feet (2") - for 4020 & 4040 extrusions we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	20,862
Likes at source	2,203
Original model	View on Thingiverse
Designer	FedorSosnin
Licence	CC-BY

Adjustable CR-10 Creality creality ender 3 Ender3 Ender 3 feet

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts