Groot Planter (Less supports, cleaner print, drain hole)
Arrives damaged? Free reprint, just film the box being opened. Returns policy
About this print
A plant pot modelled after the character Groot from the Guardians of the Galaxy franchise. The design includes a drainage hole in the base and is commonly used for small plants such as succulents or cacti. PLA is a popular choice for decorative planters, though PETG offers better moisture resistance for pots that will be watered frequently.
From the original design page
Original maker's notes
By Phaedrux on Thingiverse · CC-BY
People were complaining about Obj files so I added some STL versions.
Thanks to MrTheKod for the re-remix!
The original re-remix file had some internal geometry issues and needed to be repaired before it could be printable. I made some changes to make it print more easily, faster, and with less material and supports.
I started with the 123k vert version and repaired it with NetFabb. I've included that repaired original file to compare against my changes. I then used TinkerCad to insert some geometry inside the model hollows to fill the voids. This was mostly on the shoulder blades and chest plates. I also went ahead and added some support under the arms so that it doesn't need so much support material and prints more cleanly.
In general the changes are incredibly hard to notice without looking very closely. (see photos above) And the improved print time and material usage is pretty substantial. 386g and 18 hours before, versus 315g and 14 hours on the redone file.
With these changes, the only areas that require supports are now the chin and the upper hand. By using tree supports in Cura these can easily be supported from touching only the build plate, and the supports come away cleanly.
I've included the Cura .3MF project file that includes my print parameters and supports generated. You may need to change the extrusion width as I have a 0.6 nozzle.
Upon request I've added a version with a drain hole.
Added pictures showing where to put the support blockers in Cura and where the tree supports grow. Kind of fitting that he uses tree supports, no? 8^D
Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.
Printing Groot Planter (Less supports, cleaner print, drain hole)
For Groot Planter (Less supports, cleaner print, drain hole) we would normally reach for PETG or ASA — they shrug off UV, heat and damp far better than PLA outdoors. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.
Model details
| Downloads at source | 23,135 |
|---|---|
| Likes at source | 1,657 |
| Original model | View on Thingiverse |
| Designer | Phaedrux |
| Licence | CC-BY |
More popular Thingiverse models
Got your own design?
You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.
- STL, STEP and 3MF
- Priced from £6.90
- Free Tracked 48 over £40
- Printed in-house in Hampshire
Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts