Customizable LEGO compatible Text Bricks
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
**Customizable LEGO compatible Text Bricks**
This is a customizer for creating LEGO® compatible rectangular bricks with text engraved on the sides (all 4 sides). You can of course also use it to create bricks without any text. It can create bricks as small as 1x1x1 (plate height) or as large as 48x48x18 (6 normal bricks high).
---
There is also a key fob remix of this thing:
<div><a rel="nofollow" target="_blank" href="/thing:4633973"><img alt="Customizable LEGO compatible Text Brick Key Fobs" title="Customizable LEGO compatible Text Brick Key Fobs" src="https://cdn.thingiverse.com/assets/e7/0b/6b/2b/d5/medium_preview_KeyFobBricks-700x526.jpg"></a></div>
---
**Getting A Good Fit**
All dimensions are accurate, but the customizer has a tolerance parameter so the dimensions can be adjusted to your printer/filament so that they have a perfect fit with one another and with real LEGO® blocks. Real LEGO® blocks have a horizontal play of 0.2 mm so that they can be connected to one another. So a 4x2 brick is 31.8x15.8 mm and a 6x2 brick is 47.8x15.8 mm, for example. The tolerance is in addition to the required 0.2 mm play and is subtracted from both sides of all walls so that a tolerance of 0.05 would make the previously mentioned bricks 31.7x15.7 mm and 47.7x15.7 mm. If your printed bricks are too tight you'll probably want to set this to a non-zero value to loosen the fit. For complete control over the fit, the customizer also has a section that allows you to…
