Customizable Drawer Handle or Cabinet Handle
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a customizer for creating arc shaped cabinet handles or drawer handles.There are two basic styles that can be created: cylindrical and spheroidal.
The design is 3D-printer friendly: no supports are needed except for spheroidal handles with really large X and Y dimensions (length and clearance) and a really short Z dimension (height).
All dimension parameters, except for the tolerance parameters, are shown in the second picture. The customizer can optionally create nut holes for inserting nuts into the handle for the screws to screw into. The nut holes are visible in the vertical yellow handle in the first picture. The customizer can create plugs for the nut holes in case you are mounting them vertically and want to hide the holes.
It can also create a smaller test piece so that you can test the sizing of the holes to make sure that the holes will be sized well for the screws and nuts.
*The funky looking green handle second from the bottom wasn't directly created by the customizer; it's just a merged model of the handle above it and the handle below it.*
*The customizer will create 1) the handle, 2) the test piece, or 3) the nut hole plugs. To simplify viewing of this thing, the third STL has all three of these options combined into a single STL file.*
---
**Using the Customizer**
Thingiverse hadn't run their customizer queue from Jul 10, 2020 to Aug 4, 2022 and may stop running it at any time again, so if they don't process your customized…
