ESP32 DevKit Case

Name: ESP32 DevKit Case (3D printed)
Brand: Hark Tech
Price: 4.00 GBP
Availability: InStock

From £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 1,384 likes ↓ 25,494 downloads

🖨️ Get this printed · from £4

Have us print this for you

Typical cost for this model in PLA: ~£4 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A two-part snap-fit enclosure for the ESP32 DevKit development board. The case features a routed opening to accommodate USB cables with larger shrouds, two apertures on the lid for LED visibility, and moulded button covers that allow the on-board buttons to be pressed without removing the lid. It is intended for electronics hobbyists and developers who need a tidy housing for a bare DevKit board. PLA is adequate for a stationary desk or bench enclosure.

From the original design page

Original maker's notes

By bkgoodman on Thingiverse · CC-BY

ESP32 Development Board Case Top and base snaps together. Has routed USB connector to accomodate cables with larger shrouds. Has 2 holes on top for LED visibility, and buttons built into the top of the lid which allows user to press on-board buttons without removing lid.Note that I had previously said this works for a "NodeMCU" board - but it's actually for a "DevKit" board. Look on the back of your board - if it says "DevKit" it will fit. Printed on Dimension (ABS) and PRUSA MK3S (PLA) printers. Design publicly available here

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing ESP32 DevKit Case

For ESP32 DevKit Case we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	25,494
Likes at source	1,384
Original model	View on Thingiverse
Designer	bkgoodman
Licence	CC-BY

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts