Bokoblin Chest Cartridge Holder
Arrives damaged? Free reprint, just film the box being opened. Returns policy
About this print
A decorative storage chest styled after the Bokoblin enemies from The Legend of Zelda: Breath of the Wild, designed to hold Nintendo Switch, DS, and 3DS game cartridges. The chest is available as a four-piece or two-piece assembly, with the four-piece version requiring minimal supports and some gluing between parts. PLA is a practical choice for this decorative piece, as it captures fine surface detail well and prints reliably without warping.
From the original design page
Original maker's notes
By aardimus on Thingiverse · CC-BY
**Bokoblin Chest** from **The Legend of Zelda: Breath of the Wild**, modeled and sized to hold your precious Nintendo Switch, Nintendo DS and Nintendo 3DS cartridges.
Comfortably holds around 14 Switch cartridges facing front, or 10 DS/3DS cartridges facing to the side. You can fit more (up to 21 Switch cartridges with some Tetris skills, or 12 DS/3DS cartridges), but it'll be difficult to browse them.
Available in 2 sets of STL files:
• **4-piece set** (`Roof`, `Upper`, `Lower`, `Floor`) — minimal support needed; some gluing required.
• **2-piece set** (`Full Top`, `Full Bottom`) — no seams, but lots of support required.
Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.
Printing Bokoblin Chest Cartridge Holder
For Bokoblin Chest Cartridge Holder we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.
Model details
| Downloads at source | 21,659 |
|---|---|
| Likes at source | 2,479 |
| Original model | View on Thingiverse |
| Designer | aardimus |
| Licence | CC-BY |
More popular Thingiverse models
Got your own design?
You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.
- STL, STEP and 3MF
- Priced from £4
- Free Tracked 48 over £40
- Printed in-house in Hampshire
Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts






