PKD-2019 Blade Runner blaster.
Arrives damaged? Free reprint, just film the box being opened. Returns policy
About this print
A replica prop of the PKD-2019 blaster from the Blade Runner films, built from multiple printed components covering the main body and smaller detail parts. It is intended for display or costume use rather than functional operation. PETG is a practical material for the larger body sections, as it is more impact resistant than PLA and less prone to cracking when the prop is handled regularly.
From the original design page
Original maker's notes
By AndersFP on Thingiverse · CC-BY
I have printed at 0.2 layer height for the most part. The small parts (triggers and switches) ar printed at 0.05 layer height to get all the detail.
Version history:
1.01:
Unfortunately I discovered a problem with the clip - I made the "on/off box" too big, so the switch lever did not protrude far enough. It has been fixed now (just the clip.stl has changed).
1.0:
Updated the clip for a more accurate switch box. Updated text placement on Steyr frame. Moved old and alternative versions to a zip file called AlternativeFiles.zip to avoid confusion.
0.94beta:
Changed the clipholder to add more clearance to the receiver - it was a bit tight to get the wires in-between there.
0.93beta:
Changed the diameter of the tube to make it more accurate. Changed the boltfront so there is no gap when inserted in the frame. Fixed a minor error in the Steyr frames - if you have printed already, it just a matter of filing a little bit in the notch where the handle (boltmiddle) goes.
0.92beta:
Updated clip to include on/off lettering. New improved Steyr frame (stronger and more accurate). More accurate right cylinder cover. This is probably the last beta. If you have anything you think I should change please let me know before this friday (may 15).
0.91beta:
Added SteyerSwitchV2.STL which is more accurate. Added the grips with no pattern and a hollow version of the butt (these were requests from builders)
0.9beta:
Added clip and clipholder. The model is now complete (therefore in beta)!! I will do some changes over the next couple of weeks - a few inaccuracies will be fixed and a few structural issues. But it will print fine as it is now!
0.85aplha:
Added grips and butt.
0.84alpha:
Added left cylinder cover and "screwdriver"
0.83alpha:
Added Right cylinder cover with knobs
0.82alpha:
Added the bolt for the Steyr frame
0.811alpha:
Added a resin printer version of the Steyr frame with more accurate markings. Minor update to the standard frame (made the letters a little deeper so they won't be lost after sanding and filling).
0.81alpha:
Added the Steyr frame, tip and switch. Fixed a small issue with the cylinder and bulletcasing.
0.8alpha:
Initial upload containing the Charter Arms receiver, triggers, cylinder, cylinder swing arm, cylinder switch, outer handle, barrel and bullet.
Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.
Printing PKD-2019 Blade Runner blaster.
For PKD-2019 Blade Runner blaster. we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.
Model details
| Downloads at source | 41,336 |
|---|---|
| Likes at source | 1,755 |
| Original model | View on Thingiverse |
| Designer | AndersFP |
| Licence | CC-BY |
More popular Thingiverse models
Got your own design?
You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.
- STL, STEP and 3MF
- Priced from £6.90
- Free Tracked 48 over £40
- Printed in-house in Hampshire
Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts