Bonsai Planter (New HD Model with over 1,100,000 Triangles)

Name: Bonsai Planter (New HD Model with over 1,100,000 Triangles) (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

by gCreate · from Thingiverse

From £6.90 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 16,978 likes ↓ 62,237 downloads

🖨️ Get this printed · from £6.90

Have us print this for you

Typical cost for this model in PLA: ~£6.90 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A decorative planter designed to hold a bonsai tree, suited to indoor display on a windowsill or shelf. The model features a high polygon count, giving the printed surface fine detail and a smooth finish. Commonly used as an ornamental plant pot in the home. PLA is a practical material for an indoor planter, as it holds surface detail well and comes in a wide range of natural tones to complement the plant.

From the original design page

Original maker's notes

By gCreate on Thingiverse · CC-BY-SA

We attempted to design a beautiful and useful planter for your next bonsai (which we happen to love). It took several months to find the right plant to fit the planter box. This model, along with others, can be downloaded from http://www.gcreate.com/downloads/. The photos show the planter printed at 200% although we could have printed it larger, which we will do as the plant grows.
We are uploading a shelled model as well as a solid model. When printing the solid model you should set the infill to 0% and you have to cut out the top (or stop the print before it prints the top). The shelled model prints great at the full scale or 2x scale but it may be too thin at half scale.
Depending on your printer you may or may not require support. This was printed on the gMax printer at several scales and it didn't require any support just keep in mind the overhangs are over 80 degrees. Also the base has no drain holes which you may want to add.
Hope you enjoy and we can't wait to see what people fill the planter with.
*Note:
The model was created in 3ds Max 2011 but due to the export/unit issues the model is scaled up by 2540%. You may have to scale down by .0393701 depending by your slicer software. In slic3r 1.1.6 it loads correctly.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Bonsai Planter (New HD Model with over 1,100,000 Triangles)

For Bonsai Planter (New HD Model with over 1,100,000 Triangles) we would normally reach for PETG or ASA — they shrug off UV, heat and damp far better than PLA outdoors. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	62,237
Likes at source	16,978
Original model	View on Thingiverse
Designer	gCreate
Licence	CC-BY-SA

bonsai household plant planter

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £6.90
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts