🖨️ No printer? We’ll print & post it.From £4 · UK delivery from £3.45 · Free Tracked 48 over £40Get an instant quote →
1:110 and 1:96 Space X Falcon 9 with Crew Dragon - No Supports - No Painting

1:110 and 1:96 Space X Falcon 9 with Crew Dragon - No Supports - No Painting

From £4 printed to order · UK postage from £3.45, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy
Free community design ♥ 1,371 likes ↓ 18,505 downloads
🖨️ Get this printed · from £4

About this print

A scale model of the SpaceX Falcon 9 Block 5 rocket with Crew Dragon capsule, available in 1:110 and 1:96 scales. The design features separable stages, deployable landing legs and grid fins, and is engineered to print without support structures. It is intended as a display model for space enthusiasts and collectors. Printing in multiple colours of PLA, as the original designer did, is the most straightforward approach and suits the level of surface detail present across the components.

From the original design page

Original maker's notes

By oliver01000 on Thingiverse · CC-BY

A model of the SpaceX Falcon 9 - Block 5 rocket with Crew Dragon. I designed this model in Fusion 360 and also included the Fusion and Step parts. So if someone would like to make alterations or additions, feel free to do so and dont forget to upload some fotos :)

- 63 cm Length
- High Details
- All Stages separable
- No Supports needed!
- Fully Tested
- Landing legs and Grid-Fins deployable

I printed mine with 3 colours of PLA on Ender 3 with 0.2mm Layer height

Notice: For the Grid-Fins use 0 Top and Bottom Layers and only Infill Pattern!

-------------------------
UPDATE! 09.07.2020
-------------------------

As it was requested i rescaled the model in Fusion to fit 1:96 scale. I added the resized STL-files as a zip-File.
This makes the Model appr. 72cm tall.
The parts are not tested yet but as it is just slightly bigger i dont see any issues concerning printability.

-------------------------
UPDATE! 10.07.2020
-------------------------

I updated the stage 2 vakuum engine to make it a bit more realistic. See screenshot above.

-------------------------
UPDATE! 08.12.2020
-------------------------

I have added a wall mount. Falcon 9 can be easily clipped in and out. Now also available for the 1:96 sized model.

-------------------------
UPDATE! 05.01.2021
-------------------------

I have added an optional fairing with payload adapter to replace the Dragon space ship.
I have test printed all parts. Print the fairing standing upright. No Supports needed. Mine was sticking fine to the bed despite the small contact area. However if you should have problems just add a brim or raft.

Will be adding some kind of payload in the future. If you have suggestions feel free to tell me in the comments :)

UPDATE! 21.02.2021

Added some payloads for the Fairing version:

- A stack of StarLink sattelites
- A Tesla Roadster (Model is a remix of the tesla model from "AntsinAfrica" that has been scaled to fit my model. See https://www.thingiverse.com/thing:4584886 for license infos)

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing 1:110 and 1:96 Space X Falcon 9 with Crew Dragon - No Supports - No Painting

For 1:110 and 1:96 Space X Falcon 9 with Crew Dragon - No Supports - No Painting we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source18,505
Likes at source1,371
Original modelView on Thingiverse
Designeroliver01000
LicenceCC-BY

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

  • STL, STEP and 3MF
  • Priced from £4
  • Free Tracked 48 over £40
  • Printed in-house in Hampshire
Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts

Before you order

🖨️ Get this printed · from £4