Single-Perimeter Rocket for Seamless Spiral Printing

Name: Single-Perimeter Rocket for Seamless Spiral Printing (3D printed)
Brand: Hark Tech
Price: 5.18 GBP
Availability: InStock

by mech-G · from Thingiverse

From £5.18 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 2,568 likes ↓ 37,306 downloads

🖨️ Get this printed · from £5.18

Have us print this for you

Typical cost for this model in PLA: ~£5.18 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A rocket model based loosely on a V2 form, designed with a single-perimeter wall so it can be printed in spiral vase mode, which eliminates visible seams on the exterior surface. The design scales well and has been printed at a wide range of heights. Transparent or semi-transparent filaments such as T-glase are commonly used, as the thin single-wall construction allows light to pass through the finished print.

From the original design page

Original maker's notes

By mech-G on Thingiverse · CC-BY-SA

This rocket is roughly similar to a V2 design, but with a single perimeter that allows you to use the spiral vase option in Slic3r to eliminate the seams.

600mm print:
https://www.youtube.com/watch?v=0cqdwVTSIio

3D Maker Noob does comparison print of three printers using the rocket:
https://youtu.be/NiJPAq2Z0so?t=14m52s

Check out the 15x by 19x print of this rocket at the Midwest RepRap Festival:

https://twitter.com/pdp7/status/711716330899116032

3D Printing Nerd prints a 24-inch rocket here:

https://youtu.be/Rk_0AS3XCbs?t=2m19s

Niklas Ramström prints an 800mm rocket here:
https://youtu.be/mCKW5WEwDvA

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Single-Perimeter Rocket for Seamless Spiral Printing

For Single-Perimeter Rocket for Seamless Spiral Printing we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	37,306
Likes at source	2,568
Original model	View on Thingiverse
Designer	mech-G
Licence	CC-BY-SA

rocket spiral vase t-glase transparent

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts