Craftsman Socket Holders

Name: Craftsman Socket Holders (3D printed)
Brand: Hark Tech
Price: 8.63 GBP
Availability: InStock

From £8.63 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 4,804 likes ↓ 65,703 downloads

🖨️ Get this printed · from £8.63

Have us print this for you

Typical cost for this model in PLA: ~£8.63 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A set of storage trays designed to hold Craftsman sockets and prevent them from rolling around inside a tool box. The trays accommodate SAE and metric sockets in both half-inch and three-eighths-inch drive sizes, including deep, six-point and twelve-point variants. PETG is a sensible material choice, as it is more resistant to the oils and knocks typical of a workshop environment than standard PLA.

From the original design page

Original maker's notes

By OmniMaker on Thingiverse · CC-BY

I have a large set of Craftsman sockets (308 piece set #35831).

I wanted holders to keep them from rolling around in my tool box. Each of the trays were fit to my sockets, so hopefully the manufactured diameter is consistent and will fit yours too. This set of trays should hold all of your SAE and Metric 1/2" and 3/8" deep sockets, both 6 point and 12 point (and some 8 point). I will be adding trays as time permits to complete the set.

I used a permanent marker to paint the raised numbers and make them easier to see.

You can lift each tray of sockets out of your tool box by gently squeezing a couple of the sockets together and lifting. Friction holds the gripped sockets to the tray and they can be lifted out as a group.

**UPDATE 10-31-2020:** I added the missing trays for 1/2" Drive sockets and the missing trays for 3/8" drive sockets. This should make the set complete for 3/8" and 1/2" drive sockets. Also, I added a little clearance to the original trays to help make sure that they fit well even if printed with a low quality printer. The old files have been removed and the updated clearance files have been uploaded using the same names. If you downloaded prior to 11-1-2020, I urge you to check the file dates and get the new versions.

**UPDATE 11-10-2020:**
I was inspired by the number of downloads and decided to finish the set. I have added the 1/4" drive socket trays.

I also added some "Bonus" trays that are useful in my toolbox, maybe useful to you as well

** UPDATE 11-25-2020:**
I forgot to upload the 3/8 8 point tray. It's there now for those who need it

Enjoy!

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Craftsman Socket Holders

For Craftsman Socket Holders we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	65,703
Likes at source	4,804
Original model	View on Thingiverse
Designer	OmniMaker
Licence	CC-BY

craftsman socket socket holder

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £6.90
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts