Samurai Mask Model 3

Name: Samurai Mask Model 3 (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 2,434 likes ↓ 32,759 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A Japanese-inspired decorative mask drawing on samurai and oni imagery, sized to suit wider faces and listed as wearable. An alternative version is available with the fangs supplied as separate pieces to simplify printing. PETG is a sensible choice for a wearable item, offering more resilience than PLA under the flexing that occurs when fitting and removing a close-fitting mask, and it paints and finishes without difficulty.

From the original design page

Original maker's notes

By flioink on Thingiverse · CC-BY-SA

I made another samurai inspired mask. This one is a bit bigger so it should fit wider faces without any resizing. Since there are some thin areas, to keep it light, scaling down should be done only after you verify with you slicer. Had A lot of fun making this one, hope you like it:)

Edit: By request I've added a no fangs version with the fangs as separate objects.
That should be easier to print that way, but I haven't tested it.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Samurai Mask Model 3

For Samurai Mask Model 3 we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	32,759
Likes at source	2,434
Original model	View on Thingiverse
Designer	flioink
Licence	CC-BY-SA

artwork Japanese culture mask oni samurai wearable

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts