Ender3 Perfect Bed Leveling

Name: Ender3 Perfect Bed Leveling (3D printed)
Brand: Hark Tech
Price: 4.00 GBP
Availability: InStock

From £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 4,849 likes ↓ 47,865 downloads

🖨️ Get this printed · from £4

Have us print this for you

Typical cost for this model in PLA: ~£4 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A calibration test print used to assess the accuracy of manual bed levelling on the Creality Ender 3 printer. By examining print quality across the test pattern, users can judge whether the nozzle-to-bed gap needs adjustment and correct it before starting a real print job. PLA is the appropriate material for this test, as the purpose is to evaluate printer setup rather than produce a functional part.

From the original design page

Original maker's notes

By thanapolboss on Thingiverse · CC-BY

*UPDATED Version*
New Eco Version of the perfect bed leveling,
Check Perfect bed for lower filament usage and time!
++++++++++++++++++++++++++++++++++++++

Hi Everyone!
This bed leveling test is used to check if your manual bed leveling is perfect or not!

Please make sure that you manually level the bed using paper before using this test.

The perfectness is checked by the print quality on the circle which can be compared with the Picture I attached.

1st = Too much gap between bed and nozzle, please raise your bed.
2nd = Too little gap between bed and nozzle, please lower your bed.
3rd = Perfect gap, you can rub the layer to see if it is perfectly smooth or not.

Full version Dimension:
Outer Rectangle - 170 x 170 mm
inner Rectangle - 85 x 85 mm
All Circle Diameter - 20 mm

Eco Version Dimension:
Outer Rectangle - 170 x 170 mm
Center Circle Diameter - 20 mm
Outer Circle Diameter - 15 mm

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Ender3 Perfect Bed Leveling

For Ender3 Perfect Bed Leveling we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	47,865
Likes at source	4,849
Original model	View on Thingiverse
Designer	thanapolboss
Licence	CC-BY

bed level bed leveling Bed level test leveling

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts