Rolling Storage Box

Name: Rolling Storage Box (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 2,818 likes ↓ 60,229 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A modular storage bin system made up of individual compartments that link together at hinged joints, allowing the assembled strip to roll or fold flat. The bins can be arranged in series to suit different storage needs and are intended for organising small hardware, workshop components, or craft supplies. PETG is a practical material for storage bins as it is more impact-resistant than PLA and holds up better under regular handling.

From the original design page

Original maker's notes

By 3d-printy on Thingiverse · CC-BY

This is a customizable rolling storage bin system.

Pick a size (small, medium, or large) and 8 bins that match your storage needs (you must include a "start" and "end" bin).

Connect the bins by inserting a short piece of filament into each hinge joint.

## Update - Feb 9th, 2020
A new **extra large** bin size has been added. This is long enough to fit pens and markers.

## Update - Feb 12th, 2020
A new **alternate end bin design**. Supports velcro straps or pull tabs to make opening the bin easier. This is highly recommended for the larger sized bins.

## Update - March 8th, 2020
-New **stackable core design**.
-New **drawer bin design**.
-New **sliding bin design**.

##Optional
- Add 6mmx3mm cylinder magnets to the start and end bins to keep the bin securely closed
- You can add print-in-place hinges by placing each bin 35mm apart and inserting the included pin stl inside each hinge. The pin STL will plug and seal the hinge hole.

### Videos
**Introduction**
https://youtu.be/Cm5bByFYJKk

**More Bins**
https://youtu.be/ak8NoDQWSmo

**Even More Bins**
https://youtu.be/tUDJG0Tqd8U

**Giant Rolling Storage Box**
https://youtu.be/wqrAZMdrNLQ

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Rolling Storage Box

For Rolling Storage Box we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	60,229
Likes at source	2,818
Original model	View on Thingiverse
Designer	3d-printy
Licence	CC-BY

bin box hardware organization organizer rolling storage Storage Box

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts