VORON Fan Duct Ender 3 V2

Name: VORON Fan Duct Ender 3 V2 (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

From £6.90 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 1,874 likes ↓ 38,817 downloads

🖨️ Get this printed · from £6.90

Have us print this for you

Typical cost for this model in PLA: ~£6.90 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A fan duct and mounting assembly that adapts the VORON Switchwire part-cooling arrangement to fit a stock Creality Ender 3 V2 printer, without requiring a linear rail conversion. The design replaces the standard 4010 cooling fan with a 4020 blower and requires M3 screws for assembly. PETG is the recommended material, as the duct sits close to the hotend and benefits from the higher heat resistance it offers over PLA.

From the original design page

Original maker's notes

By NEbie on Thingiverse · CC-BY

This is the modified mount for the VORON Switchwire to mount it to a stock Ender 3 v2 (no need for linear rail). Some parts need support to print (2 parts of mounting), other parts don't need support. You can see the step file to know how to assemble it.

You will need:
4x 30mm M3
4x 16mm M3
1x 10mm M3
1x 8mm M3
1x 4020 Blower Fan 24v (remove the stock 4010 fan)

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing VORON Fan Duct Ender 3 V2

For VORON Fan Duct Ender 3 V2 we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	38,817
Likes at source	1,874
Original model	View on Thingiverse
Designer	NEbie
Licence	CC-BY

Creality creality ender 3 Ender3v2 fanduct upgrade ender3v2

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £6.90
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts