Stable Watch Stand

Name: Stable Watch Stand (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

From £6.90 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 3,414 likes ↓ 23,123 downloads

🖨️ Get this printed · from £6.90

Have us print this for you

Typical cost for this model in PLA: ~£6.90 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A desk stand for displaying a wristwatch. Available in multiple sizes to accommodate a range of wrist measurements, with a two-part friction-fit construction consisting of a base and a stand. The design requires no supports when printing, making it straightforward to produce. It suits anyone who wants to store or display a watch upright on a desk or surface. PLA is a practical choice for this kind of static display piece, as it offers good rigidity without the need for flexible materials.

From the original design page

Original maker's notes

By Smackis on Thingiverse · CC-BY

I made a non adjustable version of the adjustable watch stand. Instead of the adjustability I made multiple version of the stand to fit wrist sizes between 140 mm and 210 mm in 5 mm increments. This solution is much more stable and easier to print (for obvious reasons) than the adjustable version.

I also made some changes to the base and changed the connection between the base and the stand. Base is now slightly lower profile and the stand has two "feet" that are a friction fit into the base. This means that the stand not attaches more firmly to the base so watches don´t fall so easily. I am sure friction fit will be slightly different on different printers and materials so I made it so that it is easy to adjust the stand with a few licks from a sandpaper should it be too tight. If fit is too loose there is an alternative set of bases included named *Tight that are 0.4 mm tighter than standard version.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Stable Watch Stand

For Stable Watch Stand we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	23,123
Likes at source	3,414
Original model	View on Thingiverse
Designer	Smackis
Licence	CC-BY

clock cool desk display stand easy print holder organization rolex stable supportless useful watch watchstand

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £6.90
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts