E3D v6 Bowden X-carriage mount Prusa i3

Name: E3D v6 Bowden X-carriage mount Prusa i3 (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

by Tech2C · from Thingiverse

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 1,529 likes ↓ 34,925 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A mount for fitting an E3D v6 hotend to the X-carriage of a Prusa i3 3D printer in a Bowden configuration. The clamp design holds the hotend firmly in place to prevent movement during printing, and the part includes dual fan mounts and a fan duct. PETG is worth using for this bracket as it sits near the hotend and tolerates the surrounding heat better than PLA.

From the original design page

Original maker's notes

By Tech2C on Thingiverse · CC-BY-SA

**Version 2 released: http://www.thingiverse.com/thing:1632847**

If you have a Prusa i3 and are upgrading your hotend to an E3D v6 with Bowden, then you'll need this hotend mount for your X-carriage.

As this design clamps the hotend to the mount, there's no chance of a wobbly hotend.

https://www.youtube.com/watch?v=rSiWot9tib8

**NOTE: Added dual fan mounts with fan duct**
*21 May 15 - Added 'clone' carriage and clamp for non-genuine E3D hotend*
*28 Jun 15 - Added carriage clamp with side blow fan mount*

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing E3D v6 Bowden X-carriage mount Prusa i3

For E3D v6 Bowden X-carriage mount Prusa i3 we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	34,925
Likes at source	1,529
Original model	View on Thingiverse
Designer	Tech2C
Licence	CC-BY-SA

E3D E3D Hotend E3D v6

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts