Balisong (cyberpunk Arasaka logo)

Name: Balisong (cyberpunk Arasaka logo) (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

by WakeDream · from Thingiverse

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 2,689 likes ↓ 21,547 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A practice balisong, also known as a butterfly knife trainer, featuring a cyberpunk Arasaka logo aesthetic on the blade. Balisong trainers are used for learning flipping and manipulation techniques without the risk associated with a live-blade knife. PETG or ABS handles the repeated mechanical stress of practice sessions better than PLA, as both offer greater toughness at pivot points and thin moving parts.

From the original design page

Original maker's notes

By WakeDream on Thingiverse · CC-BY

This is a Balisong for practice. It has a counterweight installation position. Of course, it feels good without it. For both the shaft and the stop lever, screws or brass rods can be used. Here I use M4*16 screws as the shaft, but M4*14 is the most suitable length, and the stop lever uses M3*8 screws. The counterweight of the blade is a 4*32 brass rod.

When you insert the counterweight copper rod, you can use a vise to force it in, but it may stretch the material to deform it. It is best to use boiling water or a hair dryer to soften the material so that it can be inserted more easily.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Balisong (cyberpunk Arasaka logo)

For Balisong (cyberpunk Arasaka logo) we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	21,547
Likes at source	2,689
Original model	View on Thingiverse
Designer	WakeDream
Licence	CC-BY

balisong balisong knives balisong trainer

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts