Arduino Nano V3 case

Name: Arduino Nano V3 case (3D printed)
Brand: Hark Tech
Price: 4.00 GBP
Availability: InStock

From £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 2,741 likes ↓ 34,485 downloads

🖨️ Get this printed · from £4

Have us print this for you

Typical cost for this model in PLA: ~£4 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A simple two-part enclosure for the Arduino Nano V3 microcontroller board. The lower half seats the two rows of board pins, while the upper half features a central hole for access to the reset button and openings aligned with the four onboard LEDs. The two halves clip together by friction without additional fixings. PLA is a practical material for this kind of compact electronics case, offering good dimensional accuracy and straightforward printing without warping.

From the original design page

Original maker's notes

By spradlinb on Thingiverse · CC-BY-SA

A simple printed case for the Arduino Nano V3. The bottom half has two rows for the bottom pins. The top design allows access to the reset pin through the center hole and visibility for the four onboard LEDs. The two halves fit together with simple friction and are held together with the help of the natural ridged pattern from fused filament printing.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Arduino Nano V3 case

For Arduino Nano V3 case we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	34,485
Likes at source	2,741
Original model	View on Thingiverse
Designer	spradlinb
Licence	CC-BY-SA

arduino arduino case Arduino Nano

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts