Glamrock Freddy Wearable Mask with Hinged Jaw

This is a modified version of Official_Dino55's Glamrock Freddy Head model.


**Modifications to the original:**

* Added hinge hardware to the upper and lower jaw. This uses standard skateboard bearings to create the talking effect when you move your mouth.
* Added holders for the ears to connect the floating pieces
* Widened the jaw hole to allow the wearer to put the mask on without disassembly
* Created eyes and eye holders which fit 44mm OD, 30mm ID 16 LED ws2812 LED rings and diffuse the light evenly.
* Provided simple Arduino code to control the eye LEDs.
* Resized the model to fit an adult's head snugly


**Paint colors used:**

* Rustoleum Gloss Marigold
* Rustoleum Gloss Almond
* Rustoleum Gloss Apple Red
* Rustoleum Gloss Seaside
* Rustoleum Metallic Titanium Silver
* Store Brand Gloss Black
* Store Brand Gloss White


**Finishing Tips:**

I used spray primer+filler and Bondo Spot and Glaze putty before the final coats with gloss spray paint and this worked really well. Apply a thin layer of Bondo, let it dry, sand it, spray with primer+filler, and repeat until the surface is as smooth as you'd like. Make sure that the last coat before painting is spray primer for best results.


**Electronics:**

I used 44mm OD, 30mm ID 16 LED ws2812 rings for the lights. These are daisy chained together and controlled by an Arduino Nano. The electronics are powered by a LiPo battery with a charging circuit.

See the FreddyEyes.ino file for the…