Butterfly/Balisong Collection - Print In Place! Including a Spork!
Black Friday: 20% off orders with £20+ of prints, taken off at checkout, ends Monday 30 November, 11:59pm
Arrives damaged? Free reprint, just film the box being opened. Returns policy
About this print
A collection of print-in-place balisong-style trainers and utensils, including knife-shaped trainers, a fork, a spoon, and a spork. The parts require no assembly and are ready to use directly from the print bed, making them popular as fidget toys and cosplay props. The knife-shaped pieces are blunt trainers rather than functional blades. PLA works well for these models, as it captures the hinge mechanisms cleanly and provides sufficient rigidity for repeated flipping.
From the original design page
Original maker's notes
By SanfordPrime on Thingiverse · CC-BY-SA
These are a great example of "Print-In-Place" 3D printing, there is no assembly and these utensils are ready to use right from the print bed. Previously I had made the Tanto and the Trainer blades, but knew in the back of my head that there was something missing.
So, here they are all in one place now, an extension to the print in place Balisong collection, the Fork n Spoon!
All of the one's I've printed have been from PLA material, but I am curious how TPU would work for these so if anyone prints using TPU please let me know how it goes.
Orientation:
Please pay attention to the printing orientation on these, the part should be standing up on the hinge end and not laying down. It will not print well laying on its side, it was designed to be standing up. There is a photo in the package that shows all the parts standing up on the build plate in the proper orientation for reference.
Infill Type / Infill Percent:
Any infill type or % will do. I have heard of the knives being printed with 0% infill but have not tried it myself. All my prints have been from 5% to 100% infill and work just fine.
Supports:
No supports are needed for any of these.
If you'd like to print with a brim for increased build plate adhesion it will still work, but the brim will need to be removed fully to keep the handles slinging clean.
I prefer to use glue stick on my build plate for increased adhesion and a skirt to purge the nozzle initially while it verifies build plate leveling.
These are honestly pretty simple to do prints, click go, then ~6hours later there's a functional butterfly tool ready to use!
If you'd like more info on these check out the video below. In the video I go through the creation and printing of these and you get to see all the issues I encountered and worked through in the process:
https://youtu.be/gS02nLBYX2I
I hope you enjoy! Thanks for checking it out! If you like things like this be sure to check out the many other models I have here.
If you're looking for a locking handle version of this butterfly knife check out the model below:
https://www.thingiverse.com/thing:6705932
Update 2-2-25a : Added Spork Tip Model
Update 2-2-25b : Added Serrated Blade Model
Update 2-8-25 : Updated Models of Spoon and Fork (found the issue with the handles when open when making the Spork & Serrated versions and it was bothering me) These new files now have "_A" after them, old models are removed.
Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.
Printing Butterfly/Balisong Collection - Print In Place! Including a Spork!
For Butterfly/Balisong Collection - Print In Place! Including a Spork! we would normally reach for PLA, or resin for the finest detail — PLA captures detail cheaply, and resin is an option where the very finest features matter. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.
Model details
| Downloads at source | 22,590 |
|---|---|
| Likes at source | 3,849 |
| Original model | View on Thingiverse |
| Designer | SanfordPrime |
| Licence | CC-BY-SA |
More popular Thingiverse models
Got your own design?
You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.
- STL, STEP and 3MF
- Priced from £4
- Free Tracked 48 over £40
- Printed in-house in Hampshire
Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts






