Touring Bike Business Card
Black Friday: 20% off orders with £20+ of prints, taken off at checkout, ends Monday 30 November, 11:59pm
Arrives damaged? Free reprint, just film the box being opened. Returns policy
About this print
A novelty business card featuring a touring bicycle design that assembles into a small model. Parts snap out from the printed card and connect together to form a miniature bike, making it an unusual gift or a conversation piece. A Christmas version of the design is also available. PLA suits this type of snap-out model well, as the small parts benefit from a material that holds fine detail and clean edges.
From the original design page
Original maker's notes
By CyberCyclist on Thingiverse · CC0
[LARGE sized model](https://www.thingiverse.com/thing:5565461)
Business card with touring bike plastic model, japanese size(a bit larger than U.S. card). Small plate for your name. Optimized for FDM printer with 0.4mm nozzle.
It's better to fix parts with instant glue in each assemble steps.
Inspired by Velociraptor Business Card.
http://www.thingiverse.com/thing:362357
- TouringBike_V3.3.stl
With name plate.
- NoPlate_V3.3.stl
Without name plate. A bit easier to cut out parts.
- Xmas_v3.3.stl
Christmas version.
- TouringBIke_V3.3_Individual.stl
- Xmas_v3.3_Individual.stl
No need to cut out parts.
Filament: ABS,PLA
Settings: No raft, No Support (, pre-heat recommended for ABS )
2015-04-13
Replaced the files with more loose model, Version 2. Version 1 files were archived in zip file.
2020-12-06
Uploaded Version 3. Easier to assemble, more secure fixation with snap-fit structure.
And uploaded .f3d file. ( 123D Design -> Fusion 360 )
2020-12-24
V3.1. Fine-tuned the snap-fit points.
2022-10-10
V3.2. The bottom edges are chamfered so that even if the bottom layer is crushed during printing, the mating between parts is hardly affected. (Feedback from the Halloween version in Remix)
2023-09-29
V3.3. Fixing between rear carrier and bag has been changed.
[Japanese]
[大き目サイズ](https://www.thingiverse.com/thing:5565461)のモデルもあります。
自転車プラモ名刺です。小さいプレート部分に名前を書くことができます。0.4mmノズルのFDM(熱溶解積層)3Dプリンタに特化して設計しています。基本的にパーツ間の噛み合わせで固定できますが、出力時のムラによってゆるい部分も出てきます。組み立て手順毎に瞬間接着剤で固定していくと確実です。
このモデルは恐竜プラモ名刺
http://www.thingiverse.com/thing:362357
にインスパイアされました。
- TouringBike_V3.3.stl
名前プレート付きの名刺体裁のモデルです。
- NoPlate_V3.3.stl
プレートなしのモデルです。パーツの切り離しが若干楽です。
- Xmas_v3.3.stl
クリスマス版です。
- TouringBIke_V3.3_Individual.stl
- Xmas_v3.3_Individual.stl
パーツがバラになっているバージョンです。
フィラメント: ABS,PLA
設定: ラフト無し、サポート無し、ABSの場合は予熱推奨(反りやすいので)
2015-04-13
嵌合を緩くしたものをVersion 2としてアップロードしました。元のVersion 1はZIPファイルに格納しています。
2020-12-06
組み立てやすく、またスナップフィット構造でしっかり嵌るように調整したVersion 3をアップロードしました。
Fusion 360形式のソースファイルもアップロードしてます。(123D Designがサポート終了のため放置していた)
2020-12-24
V3.1でスナップフィット部分を微調整しました。
2022-10-10
V3.2. 底面のエッジに面取りを施し、印刷時に底面が潰れてもパーツ間の嵌合に影響が出にくいようにしました。(Remixのハロウィンバージョンからのフィードバック)
2023-09-29
V3.3. リアキャリアとバッグの間の固定方法を変更しました。
Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.
Printing Touring Bike Business Card
For Touring Bike Business Card we would normally reach for PLA — it is easy to print, low-odour and plenty strong for everyday use. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.
Model details
| Downloads at source | 145,880 |
|---|---|
| Likes at source | 21,235 |
| Original model | View on Thingiverse |
| Designer | CyberCyclist |
| Licence | CC0 |
More popular Thingiverse models
Got your own design?
You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.
- STL, STEP and 3MF
- Priced from £4
- Free Tracked 48 over £40
- Printed in-house in Hampshire
Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts






