Super Best Bottle Opener

Name: Super Best Bottle Opener (3D printed)
Brand: Hark Tech
Price: 4.00 GBP
Availability: InStock

From £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 1,667 likes ↓ 31,761 downloads

🖨️ Get this printed · from £4

Have us print this for you

Typical cost for this model in PLA: ~£4 + postage from £2.95 (free Tracked 48 over £40). We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A solid plastic bottle opener designed to work without metal inserts or additional hardware. The curved prying edge contacts a substantial portion of the cap, spreading the opening force and reducing wear on the opener over time. Compact enough to fit in a pocket, it is intended for regular everyday use. PETG is a good material choice here as it offers greater toughness than PLA, helping the opener hold up well to repeated use.

From the original design page

Original maker's notes

By 4volt on Thingiverse · CC-BY

I've printed lots of bottle openers from thingiverse, and they all work, but I decided I wanted a better one:

1. No metal: does not need a coin or other metal parts
2. Opens bottles easily and quickly
3. Durable, can open lots of bottles
4. Ergonomic, fits in the hand well
5. Does not bend the cap
6. Small enough to fit in pocket
7. Easy to print

This opener uses a curved prying edge that catches on a substantial amount of the sharp cap edge, the extra contact spreads out the opening force, so the opener is much less likely to be damaged by the cap edge.

The cap lever covers the whole top of the cap to keep bending to a minimum, and the lever lip forces the cap into the opener so you only have to lift vertically to the bottle.

Since the cap is barely deformed you can (in most cases) put the cap back on the bottle and save the rest of your beverage for later.

This is version 9 and I think it works really well. If you think you have a better opener design, comment here and I would love to check them out.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Super Best Bottle Opener

For Super Best Bottle Opener we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	31,761
Likes at source	1,667
Original model	View on Thingiverse
Designer	4volt
Licence	CC-BY

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts