Airsoft foregrip
Arrives damaged? Free reprint, just film the box being opened. Returns policy
About this print
A foregrip designed to fit the rail system on airsoft replicas, including M4, M16 and AR15 style rifles. Rail-mounted foregrips provide a stable front grip position, improving control and comfort during airsoft games. This is a functional accessory for players who want to customise their replica's handling. PETG is a sensible choice, as it handles repeated mechanical loads better than standard PLA.
From the original design page
Original maker's notes
By 97bradley on Thingiverse · CC-BY-SA
Its back, with a thingiverse friendly name!! Apparently "Gun Foregrip" doesnt work for them and they pulled it..... This will slide onto a picatinny rail and screw on tight. Once I have printed and tested I will add pictures. Also, it reaches 115 mm so make sure your firmware allows that.
The pictures are of a previous smaller version to just show the screw
UPDATE
The test print of this worked perfectly. The screw fits and the guides fit right onto a rail. I am going to make a few final revisions to the height of the core and the top pin and then it should be fully working.
UPDATE
Alright there it is: what is hopefully the final revision. It should be fully functional. If you already printed the full sized handle with the bad screw then you can just print the new screw and it should fit the handle
FINAL UPDATE
ok so i have this thing printing and it works really well. THe one issue is the screw doesnt go in perfectly and is a real pain the first time you screw it in. I probably could fix this, but its really not worth it as the overall thing still functions perfectly well. What I did is I just kept screwing it in and out until a part was smooth then i went in more. Dont worry if parts of the screw itself are peeling off...it will still work. Once you have it broken in it screws in easily and works very well on a rail.
alright so one last thing. after having my print of this working for a long time it eventually loosened up a bit much and the rail actually doesnt hold on well any more. I think that if you were to just scale down the print size by a percent or two it should stop that from happening
Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.
Printing Airsoft foregrip
For Airsoft foregrip we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.
Model details
| Downloads at source | 21,103 |
|---|---|
| Likes at source | 2,062 |
| Original model | View on Thingiverse |
| Designer | 97bradley |
| Licence | CC-BY-SA |
More popular Thingiverse models
Got your own design?
You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.
- STL, STEP and 3MF
- Priced from £4
- Free Tracked 48 over £40
- Printed in-house in Hampshire
Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts