STANDARD SIZED - Universal Spool Holder

Name: STANDARD SIZED - Universal Spool Holder (3D printed)
Brand: Hark Tech
Price: 6.90 GBP
Availability: InStock

by jjpowelly · from Thingiverse

Small parts from £4 printed to order · UK postage from £2.95, free over £40 · usually dispatched within 2 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Free community design ♥ 7,916 likes ↓ 95,941 downloads

🖨️ Get this printed

Have us print this for you

PLA from £4 plus UK postage from £2.95. We prepare your model, print it across our calibrated production fleet and quality-check it before it is usually dispatched within 2 working days.

1. Pick a colour

Filament colour

2. Pick a material

3. How many

We didn’t design this model. It’s a community file from its original creator, and now and then a file has a fault that only shows up when we print it, such as walls that are too thin or parts that don’t join properly. If that happens we’ll let you know and try to fix the file, which can add a day or two. If we can’t get a good print from it, we’ll refund you in full.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files as published by the creator, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

About this print

A spool holder designed to keep a standard-sized filament reel elevated and allow it to rotate freely as filament feeds through during printing. It forms part of a wider range of sizes intended to accommodate the majority of commercially available spools, and the assembly is secured with a bolt. PETG or ABS is well suited to this application, as both materials offer the durability needed to handle the weight and repeated friction of a loaded spool over extended use.

From the original design page

Original maker's notes

By jjpowelly on Thingiverse · CC-BY-SA

This is the page for my **Standard** sized spool holder... This is for a specific size of my universal spool holder... The main page for this universal spool holder can be found below... That page has every size needed to fit 99% of the spools currently on the market...

**Main Page -** http://www.thingiverse.com/thing:1001312

**********************************************

If you're on this page, you've probably already been to the main page and decided the size you needed (which I assume is this size) so I won't go into too much detail here. But here is the instructional video on how to print and put the spool holder together

https://www.youtube.com/watch?v=zG1CFx9aUIk

#FilamentChallenge

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing STANDARD SIZED - Universal Spool Holder

For STANDARD SIZED - Universal Spool Holder we would normally reach for PETG — it is tougher and more heat-resistant than PLA, ideal for parts that take load or live somewhere warm. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Downloads at source	95,941
Likes at source	7,916
Original model	View on Thingiverse
Designer	jjpowelly
Licence	CC-BY-SA

1 3D 3D printing ABS accessories amazing art awesome Beginner Bendlay best bolt carbon character container cool cradle creation customized easy fan fiber filament FilamentChallenge

More popular Thingiverse models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.

STL, STEP and 3MF
Priced from £4
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts